Monthly Archives: May 2009
I recently was introduced to Gluten Free Mommy‘s website, which holds a plethora of gluten-free recipes written and shared by a woman who has been gluten-free for 3 1/2 years. On the site, I found a delicious recipe, Orange Almond Muffins. And bonus, it’s easy to make this even without a mixer! I’ve modified it for my own pleasure:
1/4 cup tapioca flour
1/2 cup rice flour
1/2 cup sorghum flour
1/2 cup ground almonds (finely ground with my blender)
1 tsp xantham gum
2 tsp baking powder
1/4 cup sugar
“big dash” of salt
2 eggs, beaten
1/3 cup honey
3/4 cup milk
4 tbsp butter, melted
Preheat oven to 350F and spray muffin pan with cooking spray (I like the 6-muffin “big muffin” pan). Mix the dry ingredients together in a bowl using a wooden spoon. Mix the wet ingredients together well, and add to the dry ingredients. Fold repeatedly until all dry ingredients are moistened, and pour batter into muffin pan, filling each well halfway. Bake for 20 or so minutes, however long it takes to be able to put a knife in the middle of the muffin and have it come out clean.
Since starting up Pete Pfitzinger‘s Advanced Marathoning plan in preparation for IM Wisconsin (also known as IMmoo), I’ve been feeling more confident with my running. Maybe it’s because I’m trying something new, or because I haven’t really had to put the hammer down yet. Yeah, sure, last week I had to do a 4mile lactate threshold run (that’s at 15K race pace) and Pfitzinger’s plan demands that your second half of long runs is faster than your first… but we’re not talking race-fast, we’re just talking “pick it up a little.” So, when the first marathon-pace run came up on my schedule for today, I was pretty nervous.
It’s not that my goal marathon pace isn’t something I can keep for a few miles. But with Pfitzinger’s plan, again- the last half of the run is supposed to be the hardest. So, for today’s marathon race pace run, which was supposed to total 16miles, 8 of which were designated for marathon race pace. I assumed, based on his book, that the 8 harder miles take place at the end (and I am pretty sure that’s the right approach, but if its not, someone should let me know before I get too far into this plan!). So that was the plan.
Margot, Karl, and I set off down the snowmobile trail that heads from Houghton to Ontonagon. It’s a pretty easy, gentle climb all the way to South Range, and when we approached the town, we decided to pop out onto the road and head back to Houghton via the paved route. This was decided 1) because of the GPS’s accuracy issues and 2) because it might be easier to hold a faster pace than on sandy, rocky trail.
The run was great. Our first two miles were at a decent, downhill clip of 7:15 and 7:18. A little fast, but it was mostly downhill. We stayed under 7:30 for miles 3 and 4, but mile 5 (which was mostly climbing) was a painful 7:43. Miles 6 and 7 were a bit faster at 7:15s, and the last one rang in at 7:24. Not too shabby. I felt tired, winded, but was excited to roll down Denton Road to US41 after we hit the 8th mile mark and pop onto the Portage snowmobile path. It was a nice, steady, easy pace back to town, but the 16mile goal was extrapolated to 21. Oops. Good thing tomorrow is a rest day!
You can check out the run route here: 21mile loop from downtown Houghton
Adam and two of his good buddies had their hearts set on riding Copper Harbor mountain bike trails today, and I decided to tag along. It was my first ride up in the Harbor, and all the stories and legends I’ve heard over the years about riding there were put to the test. I’ve been told its not a place for those who aren’t comfortable with steep decents, big rocks, loose rocks, shale rocks, bridges, cliffs, bridges-on-the-sides-of-cliffs, narrow trees, and so on. In other words, the rocky, undulating trails are not necessarily the place for a beginner mountain biker. But I have been riding my steel hard-tail (Jamis Dragon Comp) for over a year now. I decided it was time…
Did I mention it’s not the place for a hard-tail?
Anyway, the commute to the Harbor from Houghton typically takes 45minutes, but we stopped in Calumet for some energy drinks along the way. I went with the tried-and-true Red Bull Cola. Once we arrived in Copper Harbor, we pursued the long, steep road climb up Brockway Mountain to venture down one of the newest trails- the Brockway Mountain Trail. Once we hike-a-biked to the actual trail from the road, I was surprised that I was able to maintain speed around the undulations and switchbacks. The trails were beautifully laid out and mostly dry. Eventually, the network of trails began- some were smooth and fast, others make me wish I had a full suspension. It was a lot of work but a lot of excitement. I’m not sure I had a favorite, but the trail Stairway to Heaven was beautiful (although I’m a little less than good about riding bridges on the sides of cliffs) and the west side of Garden Brook offered some fast terrain for a hard-tail ride. I was jostled, bounced around, and tired by the time we returned to the truck. My hands were numb from the vibrations. My legs were tapped from the climbing. And my psychological well-being was over the point of stressing out about running into a tree or falling down a ravine. So I shuttled the more experienced gentlemen on two runs to the top of the mountain (via Keweenaw Mountain Lodge). To think: Some people ride these trails with single-speeds or fully rigids. Yikes.
But then, my legs were feeling pretty good all of a sudden after the last shuttle, and I decided to follow through with a brick.
I threw on my Adrenaline 8s and some new running clothes from Brooks Running Company (the Equilibrium tank and long-sleeve and the team boy shorts) and headed out for a trail run around Lake Fanny Hooe. It felt good to be on my feet, and the clothes were so comfortable. Although I typically don’t like too short of bottoms because of chafing, the boy shorts were fitted really well and felt refreshing. I will definitely be using them for trail racing and half marathons this summer. The Equilibrium tank was a little sweaty from the riding, and I thought it would give me a chill as I was running at a slower clip, but it was surprisingly well-wicking. My heart rate monitor fit well under the built-in bra for the entire ride/run combo (over 4 hours total) and I didn’t have any chafing or uncomfortable spots. The small may have been a little snug around the built-in bra band, but it wasn’t too bad (especially during the ride). I’m actually becoming less of a fan of built-in bra tops, only because I feel constricted- but I was surprised that this top had a higher neck and didn’t make me feel suffocated! I think it will be great for road-riding and triathlons, because it is not baggy around the neck and will keep my aerodynamics in check.
And what about the Equilibrium long sleeve? SO nice. It was beautifully cut, fitting me snugly where it should, and long. The seams were not noticeable at all, and the fabric was smooth, wicking, and super-lightweight. It felt as though I wasn’t wearing a long sleeve, but it still cut the breeze from off the lake. When I got into the shade, it kept me at a comfortable temp, and in the sun I really felt like I wasn’t even wearing a shirt at all. I’ve always been a fan of Brooks shorts (I have exclusively raced in a pair for all three of my marathons thus far), but the shirt was hands-down the nicest long-sleeve running shirt I’ve ever owned. Two thumbs up!
So, my first ride in the Harbor was a good one, and I’ll definitely be heading back again soon. The intimidation factor of riding the trails is over, but I think I’ll stay away from Paul’s Plunge… at least for the time being 🙂
It is nice to get settled back into the new place. After we dumped our weekend goods (tri bikes, running shoes, and gear bags… plus the miscellaneous awesome stuff from parental units), I went for a nice hour-long run on the Tech Trails. I was thinking about going longer, but the Pilgrim Trail was blocked off by downed birch tree, and when I looked at my watch it read 29:55… so I figured it was a sign. I did take my first fall of the season, though, but luckily only ended up with dirty (not bloody) hands and knees.
We left Abbie at home for the weekend, and she ended up locking herself in the bathroom. Poor thing. She really enjoys her new cat-carrier (thanks, Amy!).
This morning, I used hand paddles for the first time in the pool (Adam borrowed them from Ian). They were awesome! They helped me maintain good form, and when I took them off to swim, I felt fast and efficient. The flippers were a little big, though, and gave me a gastroc cramp… I’ll have to order some in my size!
Adam is currently cooking my favorite meal for the end of spring! It’s his own special version of white chicken chili, yum!
Here’s what you’ll need to make it:
-2 lb boneless, skinless chicken, chopped into cubes and sauted in olive oil, and dried chili powder, cumin, basil, garlic powder, and pepper
-1 large red pepper, chopped
-1 large yellow pepper, chopped
-1 onion, chopped
-1/2 gallon vitamin D milk
-small amount of cold water
Cook the chicken all the way through. At the same time, cook the vegetables in a large stock-pot with butter and salt. Add the milk to the stock pot. Mix 1 tbsp of cornstarch with equal amount of cold water at a time and add to stock pot, stirring constantly. Once the chicken is fully cooked, blend it in the food processor and then add to the stock pot. Add more cornstarch/water mix and stir chili until the soup is thick enough for your liking. Then, it’s ready to serve!!! I like it with shredded cheese on top (cheddar or colby/jack), and with a side of Chebe bread !!
I am wrapping a brief venture to the Lower Peninsula, where the boys (Andrew and Adam) and I had our triathlon bikes professionally fitted. We went to ProFit Bicycles in Sylvan Lake, located in the Skier’s Peak Ski Shop. What a cool place. The owner and pro-fitter, Chad Johnson, was awesome. He spent a thorough 2+hrs with each of us, hammering out our position based on our goals (for all of us, I think it was focused on power, aero, and comfort). He made significant changes to my position, including lowering my bars, raising my seat, chopping off my aero-bars… And he provided good conversation, too.
The trip down was decent, probably because I slept a lot of it. My parents met up in Sylvan Lake and we went out for lunch and took Sam to the park. It was so great to see them! It was a beautiful day, too. I am so glad they were able to meet up.
Today, we went to the Eastern Market in downtown Detroit. Holy cow, what a big market! There were so many vendors. I went to Rocky’s and bought deliciously fresh nuts and dried berries for some great, healty trail mix. After the market, the boys and I went for a brick workout at Stony Creek Metropark. We rode our triathlon bikes around the park twice and went for a short (4 mile) run on the trails in the park. It was a little windy on the bikes, and I wasn’t very good about staying aero for the first lap- but made it around the second lap nearly the entire way (until the road got a little choppy at the entrance).
Here’s something I shared with the undergraduate students who are working or planning on working in the Soft Tissue Mechanics Lab (where I work):
I thought I’d share with you some information that I didn’t quite pick up on until I entered graduate school. As undergrads, you have a great opportunity to experience first-hand what it is like to do scientific research and work independently. The biggest and most important part of research is learning and teaching- both ourselves and others. We can use certain mediums to teach others what we are learning and developing. Perhaps this will provide incentive as the summer begins for getting involved in projects and/or cranking out some good data…
Through the summer, we’ll be sharing our ideas and results with each other in regular lab group meetings. We need to make sure that our findings and ideas are shared with others in the field, and the best way to do this is by publishing manuscripts in peer-reviewed journals as well as presenting our work at conferences. For me, attending a conference was my “first step” in sharing my research.
At conferences, we are offered the opportunity to chat with others who are doing similar research, which can elucidate potential collaborative efforts as well as open doors for future professional opportunities. As a bonus, attending a conference offers an opportunity to travel and see new places- more of an incentive to get your research done. So, if you are doing the work, collecting data, and getting results, the next step is to share these findings! Plus, conferences are not like going to class, where you have to sit there for an hour and listen to someone ramble on. You can pick and choose what talks you want to see, each talk is usually only 15minutes long, and the research presented is new, innovative, and (typically) interesting. It’s a competition to get a podium talk at a conference, so the talks are of cutting edge research in an area that is hopefully of interest for you (that’s why you’re involved in the Soft Tissue Mechanics Lab, right?!).
In the past, members of our lab group have attended conferences hosted by the Orthopaedic Research Society, American Society of Mechanical Engineers, American Society of Biomechanics, European Society of Biomechanics, and International Society of Biomechanics- in places such as California, Vancouver-BC, Switzerland, Florida, Colorado, Virginia, and Ann Arbor. Some future conferences include:
ASB in Rhode Island (2010)
Summer Bioengineering Conference in Naples, Fl (2010)
ESB in Edinborough, Scotland (2010)
So, is that motivation? Nicole and I get to go to Tahoe in June, so I’m pretty pumped about that.